Fiber Cleaver FTTH Fiber Optic Tools High Precision 6C Cable Cutting Fiber Optic Knife Tools Fiber Cleavers 12 Surface Blade

Product Information

The CI-03 is a single action fibre cleaver which does not need the user to engage the blade prior to cleaving as with some other cleavers. We produce a wide range of standard and bespoke fibre optic patch cord and pigtail assemblies made up from a wide variety of connector types, both singlemode and multimode, using our high quality cables.

Sumitomo also manufactures a wide variety of other fiber optic tools including fiber cleavers, fiber jacket strippers, fiber holders and fiber arrangement tools. mm, depending on the model, and are available for single mode, multimode, and polarization-maintaining fibers. When we need to join two optical fibers together, we usually use mechanical splice or fusion splice. The shock resistance test does not guarantee the product will not be damaged under these conditions.As part of the installation process of a fibre optic network it’s often necessary to splice fibre optic cables together, for instance when installing fibre trays to the main multi-core fibre cable, repairing damaged sections of cabling or extending existing cable runs. Significant cost savings and reduction in process variation associated with cracking are typical of mechanical cleaving methods.

Since both the scribing and breaking process are under manual control, this method varies greatly in repeatability. Sumitomo is most well known for their consistently high-quality fusion splicers which are now considered standard equipment by many technicians and engineers in the fiber optic field. Determine whether you require a single- or multi-fiber cleaver that can precisely cleave one to 12 fibers at a time. The reduced lid size and wide opening angle facilitates fiber loading and improves stability resulting in better single and ribbon fiber cleaves.Cleavers that are designed for fusion splicing require a low average angle that is one degree or less, while cleavers appropriate for mechanical connectors require angles below three degrees. The cleaver blade is pushed into position, the fibre is clamped in the v-groove and the cleaving arm is lowered to initiate the cleaving action. Recommended adapters: LC, LC-APC, LC-Duplex, SC, SC-APC, ST, FC, FC-APC, MDC, MDC-J, and SMA connectors with fiber diameter of <300 μm. EDP also provide rack access control systems for improving the security of 19″ racks, with our RackANGEL solution providing the ultimate security solution for 19″ cabinets.